Skip to main content
Figure 2 | BMC Hematology

Figure 2

From: An in vitro evaluation of standard rotational thromboelastography in monitoring of effects of recombinant factor VIIa on coagulopathy induced by hydroxy ethyl starch

Figure 2

The figure shows the result of a ROTEG analysis. Time is represented on the X axis and clot strength on the Y axis. The clot strength is arbitrarily measured in mm where maximum clot strength is 100 mm. The Clotting Time (CT) is the time from initiation of the analysis until the clot strength is 2 mm. The Clot Formation Time (CFT) is the time from clot strength 2 mm until clot strength 20 mm. A15 is the clot strength at 15 minutes.

Back to article page

BMC Hematology

ISSN: 2052-1839

Contact us